NI 9862 1PCS National Instruments NI-9862 781639-01
$ 290.4
Description
NI 9862 1PCS National Instruments NI-9862 781639-01. NI 9862 (C Series 1‑Port High‑Speed CAN FD Module). NI 9862 (part number781639‑01 ) is a1‑port, isolated High‑Speed CAN/CAN FD interface module forCompactDAQ (cDAQ) andCompactRIO (cRIO) systems, designed exclusively for theNI‑XNET driver suite. NI 9862 (C Series 1‑Port High‑Speed CAN FD Module) NI 9862 (part number 781639‑01 ) is a 1‑port, isolated High‑Speed CAN/CAN FD interface module for CompactDAQ (cDAQ) and CompactRIO (cRIO) systems, designed exclusively for the NI‑XNET driver suite. It provides robust, real‑time CAN bus communication for industrial and automotive applications, integrating a high‑performance controller and transceiver in a compact C‑Series form factor. Key Features 1 isolated CAN port (9‑pin male D‑SUB connector) Controller : Bosch DCAN, CAN 2.0B compliant, supports 11‑bit (standard) and 29‑bit (extended) IDs Transceiver : NXP TJA1041AT, ISO 11898 High‑Speed CAN, up to 1 Mbps ; CAN FD compatible Isolation : 60 VDC continuous, 1,000 Vrms withstand (5 s) port‑to‑ground Voltage range : CANH/CANL: −27 VDC to +40 VDC External supply (VSUP): +9 VDC to +30 VDC Max nodes : Supports ≥110 CAN nodes on a single bus Power : 1 W max (active, from chassis); 1.25 W thermal @70 °C Temperature : −40 °C to +70 °C (industrial extended) Dimensions : 10.67 cm × 16.76 cm (4.2 in × 6.6 in); Weight : ~144 g (5.0 oz) NI‑XNET Capabilities DMA engine : Offloads frame/signal processing to hardware, μs‑level latency , minimal CPU load Timestamping : 1 μs precision for all CAN frames Modes : Active, listen‑only, loopback; CAN FD dynamic data‑rate switching Applications Hardware‑in‑the‑Loop (HIL) simulation Rapid Control Prototyping (RCP) Automotive ECU testing & validation CAN bus monitoring, logging & diagnostics Industrial automation & embedded system communication Software Compatibility NI‑XNET driver (required) Supported environments: LabVIEW, LabWindows/CVI, C/C++, Python NI‑MAX for configuration, bus monitoring, and test panels On May 19, 2026 at 23:58:33 PDT, seller added the following information:
