4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2

4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2" Lug

$ 60.7

Wheel Bolt Pattern:: 5x4.5" (5x114.3) Finish: Anodized Silver Number in Pack: 4 Thread Size: 1/2"-20 Material: High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs Bolt Pattern: 5x127 (Hub) to 5x114.3 (Wheel) Other Part Number: Allow 5x5 (Hub) to 5x4.5 (Wheel) Wheel Bolt Pattern: 5x4.5" (5x114.3) Items Included: Wheel Adapters & Nuts Spacer Thickness: 20mm Manufacturer Warranty: 1 Year Manufacturer: RDX Racing Interchange Part Number: Allow 5x127 (Hub) to Use 5x114.3 (Wheel) Manufacturer Part Number: CV-187-20B-X2-RDX Spacer Type: Hubcentric With Wheel Centric Lip Type: Wheel Adapter Installation Note: Direct Connect; Modifying Factory Studs Could Be Required Center Bore Size: 71.5mm Hub Bore: 71.5mm (Hub) to 56.1mm (Wheel) Color: Anodized Silver Performance Part: Yes Placement on Vehicle: Front Axle, Rear Axle Vehicle Bolt Pattern:: 5x5" (5x127) Brand: RDX Racing Warranty: Twelve-Month

Description

Adapter Thickness: 20mm each side Quantity: 4 Pieces Bolt Pattern: 5x5 to 5x4.5 (5x127 to 5x114.3) Center Bore: 71.5mm to 56.1mm Thread Pitch: 1/2" Adapter Type: Hub Centric w/ Hub Lip This adapter set includes open end lug nuts to secure the adapters onto your factory hubs (Your vehicle may have different thread size than what is supplied with this listing. If your factory thread size is different from 1/2" -To finalize the installation, kindly acquire a compatible set of open-ended lug nuts that match your vehicle's original thread specification. Your Factory wheel studs may extend past the surface of the wheel adapters. In this case you will need to: 1. Adjust the factory studs to a shorter length. 2. Check that the wheels have open slots (cavities) between the fastener holes. 3. Replace the factory studs with a new set of shorter studs.

Related products